2011 Subaru Outback with HK System Non-Nav Steering Wheel Controls
Printed From: the12volt.comForum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146362
Printed Date: May 09, 2025 at 3:29 AM
Topic: 2011 Subaru Outback with HK System Non-Nav Steering Wheel Controls
Posted By: upjeeper
Subject: 2011 Subaru Outback with HK System Non-Nav Steering Wheel Controls
Date Posted: July 28, 2020 at 10:00 AM
Replies:
Posted By: tonanzith
Date Posted: October 01, 2020 at 1:43 PM
this is for an axxess module interface but the sw control wires to your vehicle are listed in it
Connect the Black and White/Green wires
of the ASWC-1 and the wire in Pin 14 of the
vehicle’s radio harness shown, to Chassis
Ground.
Connect the Red wire of the ASWC-1 to 12v
accessory power.
Connect the Gray/Red wire of the ASWC-1
to the wire in Pin 4 of the vehicle’s radio
harness shown.
If a wire is present in Pin 11 of the vehicle’s
radio harness shown, connect the
Gray/Blue wire to it
-------------
Gary Sather
Connect the Black and White/Green wires
of the ASWC-1 and the wire in Pin 14 of the
vehicle’s radio harness shown, to Chassis
Ground.
Connect the Red wire of the ASWC-1 to 12v
accessory power.
Connect the Gray/Red wire of the ASWC-1
to the wire in Pin 4 of the vehicle’s radio
harness shown.
If a wire is present in Pin 11 of the vehicle’s
radio harness shown, connect the
Gray/Blue wire to it
-------------
Gary Sather