Print Page | Close Window

AFI Marinco Wipers Park Operation

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146403
Printed Date: April 16, 2024 at 4:04 PM


Topic: AFI Marinco Wipers Park Operation

Posted By: itolond
Subject: AFI Marinco Wipers Park Operation
Date Posted: August 19, 2020 at 7:11 PM

Hi Forum,

I have a custom build and need to understand wiper park function better to solve my next steps. In short the wiper unit i have in an AFI Marinco wiper motor with 4 wire connectors (Hi sp/Low sp - Earth and const) - lots of reasons for the mod so I need to work within this parameter.

Most wiper motor (car) have a 5 wire which includes a part function (which the AFI Marinco does via const 12vdc)

This issue here is using factory type wiper control units (wiper wash and intermittent) - hoping to use the factory delay etc but unsure if its at all possible?

anyone have any guidance on this


Print Page | Close Window