2008 Mitsubishi Lancer, Factory Radio Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146687
Printed Date: May 03, 2024 at 4:33 PM
Topic: 2008 Mitsubishi Lancer, Factory Radio Wiring
Posted By: karmalurkin38
Subject: 2008 Mitsubishi Lancer, Factory Radio Wiring
Date Posted: January 18, 2021 at 10:13 PM
I'm looking to find out What the color code is of my factory radio in my 08 Mitsubishi Lancer The car come with no radio And the harness is cut
-------------
Karmalurkin38
Replies:
Posted By: i am an idiot
Date Posted: January 19, 2021 at 8:13 PM
Radio 12V red/white + radio, white 20 pin plug, pin 10
Radio Ground black - radio, white 20 pin plug, pin 20
Radio Ignition yellow + radio, white 20 pin plug, pin 1
Radio Illumination green/white (dimmer) + radio, white 20 pin plug, pin 9
Factory Amp Turn-on pink or blue + radio, white 18 pin plug, pin 17 or 7
Power Antenna pink + radio, white 20 pin plug, pin 14
Left Front Speaker (+/-) white/blue - black/yellow +,- radio, white 20 pin plug, pins 8 - 18 Notes
Right Front Speaker (+/-) white/red - black/red +,- radio, white 20 pin plug, pins 6 - 16 Notes
Left Rear Speaker (+/-) yellow/blue - gray/blue +,- radio, white 20 pin plug, pins 7 - 17 Notes
Right Rear Speaker (+/-) yellow/red - gray/red +,- radio, white 20 pin plug, pins 5 - 15 Notes
Subwoofer (+/-) green - yellow (1); blue - white (2) +,- amplifier under driver seat, white 18 pin plug, pins 1 - 9; 2 - 10
Posted By: karmalurkin38
Date Posted: January 19, 2021 at 9:22 PM
I have two blacks plus another one that isn't in the harness It's grounded inside where the radio goes To the right On a metal bracket ------------- Karmalurkin38
Posted By: geepherder
Date Posted: January 20, 2021 at 2:40 AM
If you have a multimeter (a cheap one will do), touch the negative meter lead to the outside of the accessory (cigarette lighter) output. Touch the positive lead to ypor black wire in question. Check for voltage (key on, key off, parking lights on, etc.). If no voltage present, check for continuity (low resistance) to ground.
Or just use your own ground.
This is some good reading if you haven't seen it yet:
https://www.the12volt.com/installbay/forum_posts.asp?tid=74637------------- My ex once told me I have a perfect face for radio.
|