2018 Jeep Renegade PTS, Remote Start Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146742
Printed Date: April 19, 2024 at 1:26 PM
Topic: 2018 Jeep Renegade PTS, Remote Start Wiring
Posted By: mickb24
Subject: 2018 Jeep Renegade PTS, Remote Start Wiring
Date Posted: February 21, 2021 at 9:16 PM
Hi Guys.
Looking for 2018 Jeep Renegade P.T.S wiring diagrams for Remote Start:
Does the Renegade have a factory hood pin?
Thank you
Replies:
Posted By: lectricguy
Date Posted: February 24, 2021 at 8:05 AM
You should be able to go onto the Flashlogic, idatalink, or Fortin website, type in the year/make/model/and trim information for your vehicle. You will find the appropriate install guide, and the table in that guide will give you the vehicle install type number. That type install, with details regarding the color and location of the required wires, should give you most of what you need.
For hood pin, I have:
Hood Pin White/Black - BCM-Dash Fuse Box, black 60 pin plug (C4), pin 8.
You could see if your vehicle has that wire, and test if it provides a ground when the hood is open. If you have the factory alarm, you could also sit in the vehicle, lock the vehicle, setting the alarm. wait 1 minute, then open the hood and see if the alarm is triggered.
Hope this helps.
-------------
Lectric Guy
|