2018 Toyota Yaris L, Keyless Entry Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146874
Printed Date: April 26, 2024 at 2:52 AM
Topic: 2018 Toyota Yaris L, Keyless Entry Wiring
Posted By: signaltech
Subject: 2018 Toyota Yaris L, Keyless Entry Wiring
Date Posted: June 07, 2021 at 5:40 AM
I am installing a Viper 412V (211hv) keyless system. I understand this is a negative trigger. On the ECU connector, what wires do I connect the Green/blk and Blue/blk to? Any help would be greatly appreciated. Thanks.
-------------
Thanks!
Replies:
Posted By: mgoetz74
Date Posted: June 07, 2021 at 12:15 PM
Power Lock violet - Body ECU on dash fuse box, white 30 pin plug, pin 9
Power Unlock beige - Body ECU on dash fuse box, white 30 pin plug, pin 10
-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!
Posted By: signaltech
Date Posted: June 07, 2021 at 1:26 PM
Thanks for the reply. I have hooked the wires up those colors, however it does not actuate the locks. I seem to be missing something. I have the black, purple/purple violet hooked to ground.
The white/black, and brown/black are not connected. Still trying to understand what I didn’t do correctly. Any additional help is very much appreciated. Thanks.
-------------
Thanks!
Posted By: mgoetz74
Date Posted: June 07, 2021 at 4:18 PM
the white/black and brown/black are not used. the purple/black and the purple wires should be going to to ground
-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!
Posted By: signaltech
Date Posted: June 07, 2021 at 4:46 PM
Any information as to how to handle the factory alarm able and disable? Do they need to be connected as well? ECC white 30 pin plug, black and green wires.
It seems I’ve done everything correctly, but it’s still not working. Many thanks mgoetz74! ------------- Thanks!
Posted By: signaltech
Date Posted: June 08, 2021 at 12:39 PM
It’s now working. My connections using Automotive taps were both not making good contact. Problem resolved and I now have keyless entry. Thanks again mgoetz74
-------------
Thanks!
|