2010 Dodge Charger, Remote Start/Alarm Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146933
Printed Date: April 26, 2024 at 4:03 PM
Topic: 2010 Dodge Charger, Remote Start/Alarm Wiring
Posted By: markalan24
Subject: 2010 Dodge Charger, Remote Start/Alarm Wiring
Date Posted: July 13, 2021 at 10:25 AM
I have a Compustar CM900AS Remote Start/Alarm I want to install in a 2010 Dodge Charger SXT. Here’s what I have for the install:
Brain: Compustar CS7900-AS
Bypass: iDatalink AL CA
Harness: ADS HRN-CH4
Diagram: https://i.imgur.com/QCgovcv.jpg
CM900 Manual: https://fti.myfirstech.com/wp-content/uploads/2019/09/CM900S-AS_Full_Install_v1.15-2019.pdf
I’ll be using the harness setup in the lower right image (ADS HRN-CH4). For the “F” wires (ignition, 12v, ground), do I run those directly to the corresponding wires on the brain’s 8-pin connector? Or would I connect those wires from the brain directly to the car, then splice in the wires from the F connector coming from the bypass?
Any help is much appreciated.
|