2005 Toyota Highlander, Remote Start/Alarm, Door Lock Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147194
Printed Date: April 25, 2024 at 4:31 PM
Topic: 2005 Toyota Highlander, Remote Start/Alarm, Door Lock Wiring
Posted By: admays18
Subject: 2005 Toyota Highlander, Remote Start/Alarm, Door Lock Wiring
Date Posted: December 28, 2021 at 12:06 AM
I've recently started to install a Compustar CM-900AS in a 2005 Toyota Highlander and have been trying to figure out how to get the locks to work. I've looked at the wiring diagram and it has helped out but for the life of me I can figure out how the door locks need to be wired. I've tried to wire both lock and unlock to relays but with no avail. Anyone know how and what I'm doing wrong?
Replies:
Posted By: lectricguy
Date Posted: January 06, 2022 at 10:31 AM
Check the downloads section for Tech Tip 1070.
https://www.the12volt.com/installbay/downloads.asp?srch=all&term=tech+tip+1070
Power Lock (use factory alarm arm)
Power Unlock (use factory alarm disarm)
Factory Alarm Arm gray (passenger door key lock); brown (detection) (see Tech Doc 1070) - and open passenger kick, white 14 pin plug, pins 1, 2
Factory Alarm Disarm violet (passenger door key unlock); brown (detection) (see Tech Doc 1070) both - passenger kick, white 14 pin plug, pins 8, 2
That should clarify how the locks need to be wired.
-------------
Lectric Guy
|