Compustar CM2500 Full Installation Guide
Printed From: the12volt.comForum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147581
Printed Date: April 23, 2024 at 4:42 AM
Topic: Compustar CM2500 Full Installation Guide
Posted By: scottl547-413
Subject: Compustar CM2500 Full Installation Guide
Date Posted: January 19, 2023 at 5:01 PM
Hello 12volt wizards. Thank you for allowing me into your group. I'm in desperate need of the Compustar Full installation guide pertaining to the CM2500 alarm control module. I do have the basic wiring schematic that came with the CS852a Bundle I purchased. Included was Shock, 4 pin Antenna, FT-Elock. I have no intention to use the remote start, door/trunk lock features.
I did find the Jeep wiring information in this group. Thank You!
I'm partially through my install of this product in my 1999 Jeep Wrangler Sport. I did not use the white 3 wire relay connector w/fuse (labeled CN1), or the white 6 pin/4 wire, lock/trunk release harness (labeled CN3), or the DM600 harness. After Programing the remotes as directed in the materials inside the box. I can only hear the internal (Relays?) click 3 times out of the CM2500 module, that's it. One time per install/removal of the fuse.
I'm fairly confident that with the full install materials for this unit I can trouble shoot what I have done wrong. I am running out of time to remove and return this product for some type of refund or credit from the seller. Thank you in advance for your time!
-------------
Scott-Kitt
I did find the Jeep wiring information in this group. Thank You!
I'm partially through my install of this product in my 1999 Jeep Wrangler Sport. I did not use the white 3 wire relay connector w/fuse (labeled CN1), or the white 6 pin/4 wire, lock/trunk release harness (labeled CN3), or the DM600 harness. After Programing the remotes as directed in the materials inside the box. I can only hear the internal (Relays?) click 3 times out of the CM2500 module, that's it. One time per install/removal of the fuse.
I'm fairly confident that with the full install materials for this unit I can trouble shoot what I have done wrong. I am running out of time to remove and return this product for some type of refund or credit from the seller. Thank you in advance for your time!
-------------
Scott-Kitt