2016 Nissan Titan, Diesel, Push To Start, Alarm/Remote Start Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=148036
Printed Date: May 01, 2025 at 8:48 AM
Topic: 2016 Nissan Titan, Diesel, Push To Start, Alarm/Remote Start Wiring
Posted By: goodzman
Subject: 2016 Nissan Titan, Diesel, Push To Start, Alarm/Remote Start Wiring
Date Posted: May 16, 2024 at 7:44 PM
I'm looking for the alarm/remote start wiring information on a 2016 Nissan Titan XD diesel with push button start. Can anyone help me out?
Replies:
Posted By: kreg357
Date Posted: May 17, 2024 at 8:07 AM
Being as the truck has an ignition immobilized system, I'm assuming that you will use a bypass module to allow a R/S. There are complete systems available from Fortin, Compustar and iDataStart that can handle your truck. They even have T-Harness's for those systems to make the install easier.
Below is a link to a system from Fortin not using a T-Harness that shows the vehicles wires :
https://fortin.ca/download/66401/EVO-ONE_IG_REG_BI_NIS_TITAN_2016_PTS_B_66401.pdf
And here is the same system using a T-Harness:
https://fortin.ca/download/75771/EVO-ONE_IG_THR_BI_NIS4_TITAN_2016_PTS_B_75771.pdf
These systems control the locks and alarm via the CAN bus. They also supply a Tach signal, the foot Brake signal and door and hood status.
The downside is that these systems need to be flashed with the correct firmware for your exact installation prior to use. You can do this yourself with additional equipment ( Flashlink 2 ) or you could find an online seller that would perform this firmware flash prior to shipment.
-------------
Soldering is fun!
Posted By: goodzman
Date Posted: May 17, 2024 at 9:50 AM
I am using idatalink and compustar remote equipment. I have everything I need to program and install. Looking for the wiring for the truck.
Posted By: kreg357
Date Posted: May 17, 2024 at 1:47 PM
Typically all the standard wiring is included with the install guide. Compustar example below :L
https://images.idatalink.com/vehicle-install-guides/Guides/504/341/22382/EN/RSA-NI3-[CMHCXA0]-(Nissan_Titan_2016_22382)-EN-D_20240229_212413.pdf
-------------
Soldering is fun!
Posted By: goodzman
Date Posted: May 17, 2024 at 10:20 PM
It doesn't show the power wire. I see that the first pages you sent do. Thanks
|