2008 Chevrolet Trailblazer, Alarm, Remote Start, Prestige 997z, FLCART

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=148190
Printed Date: May 03, 2025 at 3:45 AM

Topic: 2008 Chevrolet Trailblazer, Alarm, Remote Start, Prestige 997z, FLCART

Posted By: greg7793
Subject: 2008 Chevrolet Trailblazer, Alarm, Remote Start, Prestige 997z, FLCART
Date Posted: October 25, 2024 at 12:08 PM

Looking for wiring diagrams to install alarm with remote start on 08 trailblazer or that match it.

-------------
GSB

Replies:

Posted By: lee.lopez
Date Posted: October 25, 2024 at 12:57 PM

In the vehicle wiring section:

https://www.the12volt.com/installbay/forum_posts.asp?tid=98950

Posted By: greg7793
Date Posted: November 09, 2024 at 9:49 AM

Can someone help with this? I'm using flcart and prestige 997z. I've flashed it using the web link but after that I needed to modify some settings. It saved everything but I'm not sure if I need to reflash it again. Thanks for any help

-------------
GSB

Posted By: greg7793
Date Posted: November 09, 2024 at 3:57 PM

i'm working on an 08 chevy trailblazer and have everything but the tach signal wire. Any help would be appreciated. I'm installing a prestige aps997Z with a flcart. I wasn't sure if any other options would work for the tach especially when it gets cold. Thanks again for any help,

-------------
GSB

Posted By: lee.lopez
Date Posted: November 09, 2024 at 8:12 PM

For tach, check for a white wire at the instrument cluster.

posted_image

Posted By: greg7793
Date Posted: November 10, 2024 at 5:27 AM

Thanks, I've been looking for a green wire. Can't remember if I read it or someone said it. But I've got the white one, took about 10 minutes. Wish I had found this site a lot sooner, would have saved so much time. Thanks for the reply and info.

-------------
GSB

Posted By: greg7793
Date Posted: November 13, 2024 at 12:10 PM

Can anyone tell me if I can modify the programming with a laptop and flprog USB cable while the brain is hooked up in the truck. Thanks

-------------
GSB

Print Page | Close Window