Print Page | Close Window

Blower motor, 2000 Grand Prix

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14969
Printed Date: May 14, 2024 at 11:03 PM


Topic: Blower motor, 2000 Grand Prix

Posted By: Wess
Subject: Blower motor, 2000 Grand Prix
Date Posted: June 15, 2003 at 10:05 AM

Blower motor on my 2000 Grand Prix only working on Hi.
Blower switch has five settings 1-5. When I purchased the car used about 7 months ago, the number 1 (low) did not work and 2-5 did work fine. Last week 2,3 and 4 went out and now only high (#5) works.
I'm assuming it may be the resistor pack, where can I locate the resistor pack and what does it look like.
Besides the resistor pack, what else can be the problem.
Thanks in advance,
Wes



Replies:

Posted By: ThaScarecrow
Date Posted: June 23, 2003 at 12:31 AM
Does sound like the resistor pack. It's located between the firewall and the blower motor. The motor is behind the passenger side knee bolster.





Print Page | Close Window