Print Page | Close Window

2002 Windstar door trigger

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15556
Printed Date: May 14, 2025 at 3:13 PM


Topic: 2002 Windstar door trigger

Posted By: ihookitup4u
Subject: 2002 Windstar door trigger
Date Posted: June 28, 2003 at 12:35 AM

I have the omega research and I have tryed Dei's direct fax , i still get a false every half hour. I do not know why. I have tryed the diode in the rear passenger tail light area and i have found 2 of the same colors and tryed them both. What do I do. Please help. I will help you all now that i know of this site, mustangs w/same problem i can fix, why not this windstar????



Replies:

Posted By: Velocity Motors
Date Posted: June 28, 2003 at 8:17 AM

A diode must be placed in-line on this wire to avoid falsing problems. Cut the wire and put the cathode side away from the dome light, then tie the door trigger input on the cathode side on the BROWN / pink. On models with the puddle lamps on the doors, can also use ORANGE / white in a 20 pin plug at the FEM for door trigger. DO NOT USE THE ORANGE / WHITE FOR DOME LIGHT SUPERVISION.

You may also need to relay isolate this wire as well as diode isolate it.Email me for the relay diagram if you wish.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window