Hey, I need the wiring diagram to install a security system into a 2002 Jeep Liberty. If there's a web site that has it let me know also. Thanks much, Dan.
-------------
Dan Bennett
Installation Tech
Electronic Engineering
Police/Ems Vehicle Bay
Remote Starter Wiring Colors and Notes |
Function | | | Vehicle Color | Location |
Start: | | | YELLOW | IGNITION SWITCH HARNESS * |
Ignition #1: | | | RED / BLUE | IGNITION SWITCH HARNESS |
Ignition #2: | | | BLACK/ ORANGE | IGNITION SWITCH HARNESS |
Ignition #3: | | | N/A | |
Accessory: | | | BLACK/ WHITE | IGNITION SWITCH HARNESS |
Brake Light: | | | WHITE/ TAN | AT SWITCH ABOVE BRAKE PEDAL |
Tach Signal: | | | TAN/RED | AT COIL # 1 |
Parking Lights: | | | LT. GREEN/ ORANGE (-) | AT HEADLIGHT SWITCH |
Headlights: | | | N/A | |
OEM Alarm Disarm: | | | LT. GREEN/ ORANGE | DRIVER'S KICK PANEL *** |
OEM Alarm Arm: | | | LT. GREEN/ ORANGE | DRIVER'S KICK PANEL *** |
Diesel Glow Plug: | | | N/A | |
Clutch Bypass Wire: | | | | |
Notes: | | * This vehicle may be equipped with Chrysler's Smart Key Transponder Theft System Only If The Ignition Key Is Gray |
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | | Vehicle Color | Location |
Constant +12 Volts: | | | PINK/BLACK | IGNITION SWITCH HARNESS |
Starter Kill: | | | YELLOW | IGNITION SWITCH HARNESS * |
Ignition +12 Volts: | | | RED / BLUE | IGNITION SWITCH HARNESS |
Dome Lights/Superv: | | | YELLOW | AT COURTESY LIGHT UNDER DASH ** |
OEM Horn: | | | BLACK/ RED (-) | STEERING COLUMN HARNESS |
Power Lock: | | | PINK/VIOLET | DRIVER'S KICK PANEL **** |
Power Unlock: | | | PINK/VIOLET | DRIVER'S KICK PANEL **** |
Trunk Release: | | | ORANGE / BROWN (+) | AT BCM THAT’S INTEGRATED INTO THE FUSE PANEL |
Alarm Input Wire: | | | YELLOW | AT COURTESY LIGHT UNDER DASH ** |
Notes: | | ** Use For Alarm Pulse Only. For Domelight Supervision, Use Either A Tan (-) or Tan/White (-) Wire Located In A Blue Plug To The Right Of The Steering Column. These Are The Driver's And Passenger Door Pulses Respectively. *** Single Wire System. A Negative Pulse Through A 475 Ohm Resistor Will Disarm The Alarm. A Negative Pulse Through A 2 K-Ohm Resistor Will Arm The Alarm. **** Single Wire System. A Negative Pulse Through A 1.4 K-Ohm Resistor Will Lock The Doors. A Negative Pulse Through A 425 Ohm Resistor Will Unlock All The Doors. |
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Thanks much. Greatly appreciate the help. If you need something for police package vehicles or anything e-mail me at
dbennett@connectingyou.com. We do all sorts of vehicles for undercover work and the like. Again thanks alot, Dan Bennett.
-------------
Dan Bennett
Installation Tech
Electronic Engineering
Police/Ems Vehicle Bay
Hey Dan, can you get me out of a speeding ticket ?
If you need anymore diagrams or help, just post and we'll see if we can help you out.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA