Print Page | Close Window

2002 Tahoe and Viper790XV

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16677
Printed Date: May 03, 2025 at 5:29 AM


Topic: 2002 Tahoe and Viper790XV

Posted By: 808vip
Subject: 2002 Tahoe and Viper790XV
Date Posted: July 24, 2003 at 7:32 PM

Does anyone know if there are any special procedures that must be done when installing a Viper 790XV with remote starter into a 2002 Chevy Tahoe? I read this in an earlier post "You must diode isolate these wires." What would happen if they are not isolated? I need to know if my installer is skipping some procedures when installing my alarm. This will be the 4th time I'm having my alarm re-installed because the BCM on my truck keeps shorting out. My GM service rep. told me that the computer in newer cars/trucks are so sensitvie that any "resistance" could short out the computer. If this is true why haven't I read about anyone else having the same problem?  



Replies:

Posted By: 808vip
Date Posted: July 26, 2003 at 1:10 AM
Today the service dept. told me that it's not the BCM but the wiring.posted_image but they still can't find the problem.


Print Page | Close Window