Print Page | Close Window

Specialty Resistors for 2002 Ram starter install

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1686
Printed Date: May 17, 2024 at 8:27 PM


Topic: Specialty Resistors for 2002 Ram starter install

Posted By: Lenknermj
Subject: Specialty Resistors for 2002 Ram starter install
Date Posted: July 03, 2002 at 5:23 PM

I have a 2002 Dodge Ram and I'm attempting to install a Bulldog Security (www.bulldogsecurity.com) remote starter, model 112.  In order for the door locks to work properly, I have to install a part which Bulldog sells, but I also need a 364OHM and an 867OHM resistor (apparently, to signal whether to lock or unlock the doors).

Also, to show parking light output, I need to install a 1400OHM resistor.

Does anyone know of a place where I can obtain resistors of these ratings with a %5 tolerance for this installation?  What type of resistors do I ask for?

Any help is GREATLY appreciated.

- Mark




Replies:

Posted By: Velocity Motors
Date Posted: July 03, 2002 at 8:25 PM

Go to your local Radio Shack or electronics store and ask the saleperson that you require a package of resistors to equal the above mentioned resistances. The best bet is to get an assorted package with all sorts of  different resistors. You will have to wire these in series to obtain the proper resistance with a DMM.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window