Print Page | Close Window

2003 GMC Sonoma Alarm/Remote Start Wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16905
Printed Date: March 29, 2024 at 5:49 AM


Topic: 2003 GMC Sonoma Alarm/Remote Start Wiring

Posted By: thym8scallmet
Subject: 2003 GMC Sonoma Alarm/Remote Start Wiring
Date Posted: July 30, 2003 at 9:49 PM

I am looking for the wiring diagrams for a 2003 GMC sonoma.  I would like the Stereo and alarm diagrams, but any help would be appreciated.  Thanks,

T




Replies:

Posted By: esmith69
Date Posted: July 31, 2003 at 2:50 PM

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |
|              12V|red                 |+  |ignition harness            |
|          STARTER|yellow              |+  |ignition harness            |
|         IGNITION|pink                |+  |ignition harness            |
|  SECOND IGNITION|white               |+  |ignition harness            |
|        ACCESSORY|orange              |+  |ignition harness            |
|       POWER LOCK|lt. blue            |+  |brown plug at BCM *1        |
|     POWER UNLOCK|white               |+  |brown plug at BCM *1        |
|       LOCK MOTOR|gray                |   |drivers kick panel          |
|     UNLOCK MOTOR|tan                 |   |drivers kick panel          |
|    DISARM DEFEAT|tan                 |   |passengers kick panel       |
| PARKING LIGHTS +|brown               |   |lt. blue plug at BCM *1     |
| PARKING LIGHTS -|white *4            |   |lt. blue plug at BCM *1     |
|       HEADLIGHTS|PURPLE / white        |-  |purple plug at BCM *1       |
|     DOOR TRIGGER|*2                  |-  |BCM *1                      |
|FCTRY ALRM DISARM|lt.green            |-  |purple plug at BCM *1       |
|       TACHOMETER|white               |   |PCM *3                      |
|       BRAKE WIRE|white               |+  |steering column             |
|     HORN TRIGGER|black               |-  |steering column *5          |
|  LF WINDOW UP/DN|blue - brown        |A  |driver window switch        |
|  RF WINDOW UP/DN|lt. blue - tan      |A  |driver kick, door harness   |
|  LR WINDOW UP/DN|green - purple      |A  |driver kick, door harness   |
|  RR WINDOW UP/DN|lt. green - purple  |A  |driver kick, door harness   |

Notes:
NOTE:  This vehicle has the passlock II immobilizer system that, when adding a remote start, must be interfaced with. Use PLDATA or TBKII for bypassing the Passlock System  *1 The BCM is located to the right of the accelerator pedal below the radio.  The plugs on the BCM face towards the drivers side.   *2 Use tan for the drivers door located in pin B4 of the purple plug, orange for the passenger door located in pin B2 of the purple plug, must diode isolate these wires.  *3 The PCM is located on the passenger fender. On the 2.2L the wire is in a black 80 pin plug pin 10, and on the 4.3L the wire is in a red 32 pin plug pin 20.  *4 This wire will not test when using the headlight switch. This wire is triggered by the DRL system. To meter the wire, start the car with the parking brake set, when the brake is released this wire will go to ground.  *5 Also found in the brown plug at the BCM on vehicles with a factory alarm.

The stereo uses the class II wiring system i think.



-------------
Ethan
-----
"Patience, persistence, and perspiration make an unbeatable combination for success"
Donate to the12volt.com




Posted By: thym8scallmet
Date Posted: July 31, 2003 at 4:51 PM

Thanks for the Info.  Can you please elaborate on the class II wiring system.  Thanks for you help.

T





Posted By: esmith69
Date Posted: July 31, 2003 at 10:51 PM

They integrate some different vehicle electronic functions into the single radio unit, and thus if you remove the radio you lose those functions.  It kinda varies from vehicle to vehicle but all of them will lose the door chimes (that remind you if you left your lights on, the key is in the ignition, low fuel, etc.).  Also there has been some talk about the oil change indicator light having to be reset by a dealer after an oil change, if the original factory radio is not still in the car.  Not sure if that one is a rumor or not but I think it's genuine.

ANYWAYS, here's some good links about the Class II system:

https://members.shaw.ca/johnz24/howto/2kaudio.html

https://www.go2pac.com/mainpage/classII.htm



-------------
Ethan
-----
"Patience, persistence, and perspiration make an unbeatable combination for success"
Donate to the12volt.com





Print Page | Close Window