2003 dodge ram 2500 hemi
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17203
Printed Date: May 16, 2025 at 1:38 AM
Topic: 2003 dodge ram 2500 hemi
Posted By: tkicked
Subject: 2003 dodge ram 2500 hemi
Date Posted: August 05, 2003 at 6:16 PM
i am trying to hook up a mannix alarm system to a truck. one thing that i can't figure out is the parking light output wire from the control module. The vehicle parking light relay is under the hood at the power center. the diagram i got from 12volt's install bay says i should connect the module output wire from the parking light to the black with yellow stripe wire at the relay center. i found that the BLACK / YELLOW wire is for one side of the truck. if i connect into this wire is it going to run all parking lights. or do i need two diodes connected from the park lights to each side of the truck. the main reason for this question is to not burn up anything. thanks for any and all info on this matter
Replies:
Posted By: Montrealler
Date Posted: August 10, 2003 at 3:33 PM
better to use resistor and relay and feed negative at the switch ...
|