2003 dodge 1500

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17958
Printed Date: July 19, 2025 at 4:25 AM

Topic: 2003 dodge 1500

Posted By: ddoige
Subject: 2003 dodge 1500
Date Posted: August 22, 2003 at 4:05 PM

can anyone send me anything on door panel removal on 2003 dodge 1500 single cab. I don't want to wing it and thrash the new truck. please contact daved@raysradio.com

thanx

Replies:

Posted By: JR_Performance
Date Posted: August 25, 2003 at 2:25 PM

I havent worked on a brand new dodge ram, but the older rams (98,99, etc.) had plastic pop pins on the door panel that pop off once the initial screws have been taken off. the plastic pins are brittle and can break easily so, use a panel popper.

Posted By: jabpreston
Date Posted: August 26, 2003 at 7:39 PM

Just remove the phillips screw by the inner door handle and then remove the bolt that holds the door handle on, to remove the handle. You can see the bolt thru the door handle hole. Then just lift up on the door panel and disconnect the wires.

-------------
jabpreston

Print Page | Close Window