Navigator 2003 tach wire

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20118
Printed Date: May 09, 2024 at 2:10 AM

Topic: Navigator 2003 tach wire

Posted By: Dspark
Subject: Navigator 2003 tach wire
Date Posted: October 15, 2003 at 12:40 AM

Could some one tell me the color and location of tachometer wire?

I installed a security alarm (Hornet 554t) with remote start and one wire calls for a tachometer wire to be connected.

Thanks,

Dspark

Replies:

Posted By: Velocity Motors
Date Posted: October 15, 2003 at 5:42 AM

You have to grab one at the ignition coil . Use any of the ones that are NOT RED / GREEN. Make sure you let the truck run for at least 5-10 minutes before attempting to learn the tach signal, otherwise it will not learn the proper signal on the truck.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Dspark
Date Posted: October 17, 2003 at 10:45 AM

Jeff
Can you tell me the location of the coil and the color of the tach wire.

Thanks,
Fred

Posted By: Velocity Motors
Date Posted: October 17, 2003 at 11:44 PM

The coils are the wires that are attached to the injectors on the top of the engine. They are the ones that go into the valve cover.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window