Hi,
I have a 1994 Oldsmobile Cutlass Supreme 4dr. It has the GM AntiTheft System, I'm not sure if it's Passlock or passkey or what... But according to Car Toys, they didn't make 1994 Cutlass Supremes with Security systems!!!! I even have the resistor on my key to show for it. Anyways, I was wondering what I should do to bypass the theft lock system for my car, where can I purchase a bypass module??
As well, I would like to find a wiring diagram. I've searched far and wide on the internet, but I just can't seem to find one. If somebody can shed some light on my situation, it would be greatly appreciated. Thank you for your time.
Also, if it's not too much trouble, does anybody have a suggestion for where I should mount my security system's ECM?... Thanks again
--mindctrl
hi , the car does have a VATs system....just the resistor deal
as for the colors:
12v+ - red and RED / white - ignition harness
ignition - pink - ignition harness
ignition #2 - purple - ignition harness
ignition #3 - orange - ignition harness
starter - yellow - ignition harness
accessory - brown - ignition harness
dome lights - dark blue(-) - at pin or at light
parking lights - brown(+) - at headlight switch
headlights - yellow(+) - at headlight switch
brake lights - white(+) - switch at pedal
reverse lights - light green(+) - at swithc on tranny
trunk pin - don't know - has a mercury switch
OEM horn - black(-) - at steering column harness
trunk release - BLACK/ white(+) - at switch
Lock - light blue(+) - driver kick panel
Unlock - black(+) - driver kick panel
Tach Signal - white - at coil
have fun
-------------