Print Page | Close Window

RF CD Changer - '93 Honda Accord

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2152
Printed Date: May 05, 2024 at 2:49 PM


Topic: RF CD Changer - '93 Honda Accord

Posted By: GhostZero
Subject: RF CD Changer - '93 Honda Accord
Date Posted: July 23, 2002 at 1:13 AM

I just bought a JVC RF CD Changer (model: CH-X1100RF) and chose to install it myself b/c i know i can be done.  The instructions for wiring it to my car are extremely vague (of course).  I have a 1993 Honda Accord SE.  Does anyone have experience with installing something like this who could help me.  I have a yellow wire (back-up memory) which is supposed to be connect to a constant power supply (even when ignition is off), and a red wire just like the yellow one which says "accessory terminal of fuse block.  These wires are coming from the RF modulator unit and are the DC in supply.  then i have to thicker wires with connectors on the ends labeld "car antenna" and "RF output".  I need help on finding the locations to connect these wires.  Can anyone help me?

-------------
~ Ghost Zero ~



Replies:

Posted By: techker
Date Posted: July 23, 2002 at 3:38 PM

red=ing{yellow/red}

yellow=12vconstent {WHITE/ blue}

black with black

on end of the anthena goes in the radio and the original anthena goes in the rf module that should be it!no more wires...



-------------
techker


Print Page | Close Window