Print Page | Close Window

98 Subaru Legacy remote starter

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22327
Printed Date: May 05, 2024 at 2:27 PM


Topic: 98 Subaru Legacy remote starter

Posted By: bluerav3n
Subject: 98 Subaru Legacy remote starter
Date Posted: December 04, 2003 at 10:02 AM

I am trying to install an Ungo RS151 remote starter in my 98 Legacy (with factory remote lock).  The documentation for the alarm is sparse, but it has the following outputs:  accessory, starter, ignition 1, and ignition 2.  I found the following ignitions wires:  BLACK/ white +12v, BLACK/ blue acc/on, black on/crank, BLACK / YELLOW crank.  Which alarm wire goes to the on/crank ignition wire?

Where's the best place to look for a tach signal?  There is a tachometer in the dash, but I'd hate to have to take the dash apart to get to it.

Also, any wiring diagrams for the door locks, pinswitches, and dome light would be greatly appreciated.




Replies:

Posted By: GmTm01
Date Posted: December 05, 2003 at 11:37 PM
Tach wire is located at  coil  :  Blue / red dots


Print Page | Close Window