When i leave my key in the ignition and exit the truck the alarm does not recognize this and auto locks. is there a way to allow the alarm to recognize the key is in ingition?
also. What is the wire for the tach sense function? the only info i can find is what wire it is NOT. i need which wire and location that it IS.
thanks
Here this will help:
1500 DODGE RAM 2002 2DR PICKUP SecurityBattery RED + (+) IGNITION SWITCH HARNESSIgnition DRK. BLU (+) IGNITION SWITCH HARNESSStarter01 YEL + (+) IGNITION SWITCH HARNESSAllDoorTrigger BRN (-) DRIVERS B PILLARFrontLeftDoorTrigger TAN - DRIVERS KISKFrontRightDoorTrigger TAN/RED - DRIVERS KICKRearLeftDoorTrigger N/ARearRightDoorTrigger N/ATrunkTrigger N/AHoodTrigger N/AFactoryAlarmDisarm LT.GRN/ORG(-) DR. KICK GROUND PULSE THROUGH OHMFactoryAlarmArm LT.GRN/ORG(-) DR. KICK GROUND PULSE THROUGH 760 OHMParkingLights VIO/YEL - (-) RELAY ISOLATE GROUND W/320 OHM RESISTORLowCurrentParkingLights 85 TO GND 86 TO POS. OF ALARM 87A TO SW.SecurityParking LightsUSE A 320 OHM RESISTORRemote StartBattery RED + (+) IGNITION SWITCH HARNESSIgnition DRK. BLU (+) IGNITION SWITCH HARNESSIgnition02 RED + (+) IGNITION SWITCH HARNESSIgnition03 RED / WHT + IGNITION SWITCH HARNESSAccessory01 BLK/WHT + (+) IGNITION SWITCH HARNESSAccessory02 BLK/ORG + IGNITION SWITCH HARNESS Starter01 YEL + (+) IGNITION SWITCH HARNESSAntiTheftSystem NONEKeySense BLU (-) IGNITION SWITCH HARNESSNeutralSafety BLK/WHT (-) IGNITION SWITCH HARNESSTach RED / BLK OR (AC) BLK/GRY AT COIL ON DRV.SIDE OF ENGINECrankShaftSensor N/ACamShaftSensor N/ASpeedSense WHT/ORG CONNECTOR C-2 PIN 27 AT PCMParkingLights VIO/YEL - (-) RELAY ISOLATE GROUND W/320 OHM RESISTORLowCurrentParkingLights 85 TO GND 86 TO POS. OF ALARM 87A TO SW.BrakeLights WHT/TAN + (+) AT BRAKE SWITCHReverseLights VIO/BLK (+) (+) 16 PIN GRY CONN DRIVERS DASHHorn BLK/RED (-) 74 PIN CONN BEHIND DR. DASH OR COLUMN PICKUP Doorlocks / WindowPowerUnLock WHITE/ GREEN - (-) DR. KICK PANEL USE 320 OHM RESISTORPowerLock WHITE/ GREEN - (-) DR. KICK USE 680 OR 815 OHM RESISTORDriverDoorMotor01 PNK/BLK + LEFT KICK PANELDriverDoorMotor02 ORG/BLK + LEFT KICK PANELPassengerDoorMotor01 PNK/VIO + LEFT KICK PANELLeftFrontWindow01 LF:LT.BLURightFrontWindow01 RF:BRN/WHTLeftRearWindow01 LF:WHTRightRearWindow01 RF:VIO/WHTSunRoofMotor01 N/ASunRoofMotor02 N/ADoorlocks / WindowsPower UnLockUSE 330 OHM RESISTORPowerLockUSE 820 OHM RESISTORConvenienceHeadLights PURPLE / YELLOW (-) 680 OHM RESISTOR,SAME AS PARK LIGHTSFrontLeftParkLightBulb SIDE OF PPL/YEL 30 TO BCM SIDE OFFrontRightParkLightBulb PPL/YEL 87 TO ONE SIDE OF RESISTOR THERearLeftParkLightBulb OTHER SIDE TO GROUND. ALSO BLK/YEL(+)RearRightParkLightBulb UNDER HOOD IN LARGE HARNESS BETWEEN DRV.HazardFrontLeft FENDER AND FIREWALL.HazardFrontRight N/AHazardRearLeft N/AHazardRearRight N/ALowSpeedWipers BRN/WHT AT SWITCH HARNESSTrunkRelease N/AMobile Audio / VideoBattery RED + (+) IGNITION SWITCH HARNESSAccessory01 BLK/WHT + (+) IGNITION SWITCH HARNESSGround -Dimmer ORG/WHT (-) RADIO HARNESSPowerAntenna YEL (+) RADIO HARNESSFrontLeftSpeakerPos DK.GRNFrontLeftSpeakerNeg BRN/REDFrontRightSpeakerPos VIOFrontRightSpeakerNeg DARK BLUE/REDRearLeftSpeakerPos BRN/YELRearLeftSpeakerNeg BRN/LT.BLURearRightSpeakerPos DK.BLU/WHTRearRightSpeakerNeg DK.BLU/ORGAmp BEHIND GLOVEBOX PICKUP Control ModulesRIGHT OF STEERING COLUMN
-------------
Gary Kline
MECP Master Technician
is there any difference in this wiring information between the 02 Ram 1500 2 door and the 02 Ram 1500 4 door trucks? I have a 4 door extra cab 4X4 and I am getting ready to start installing the audio/video/navigation stuff as well as a full alarm system with remote start and window roll up/down and radar sensor in the truck I just bought, it is a 2002 Dodge Ram 1500 4 Door Extended Cab 4X4 Automatic Trans 4 wheel Disc Brakes rear ABS and the cooles thing is it only had 6700 miles yup 6700 not 67000 miles and she looks brand spankin new... but she needs all the goodies like we have in our 97 Ram 1500 truck
Thanks in advance for any help