97 GMC door panel removal

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23112
Printed Date: May 08, 2024 at 8:45 PM

Topic: 97 GMC door panel removal

Posted By: Speance
Subject: 97 GMC door panel removal
Date Posted: December 20, 2003 at 1:57 PM

I was wondering if anyone knows how to remove the door panel off of a 97 GMC sierra standard cab. There are no screws around the door handle assembly and I don't want to just pull it off and hope I don't brake anything.

Replies:

Posted By: ck auto
Date Posted: December 21, 2003 at 7:49 PM

hi if you look carefully there are 3 slots around door handle panel push flat blade in these slot and lighlty pull at same time they will releeasde and that trim piece will come off then you can proceed from there and can't remember when they switch from clips to lift of panel so be carefull when removing panel i think it wasn't until 2000

-------------
good luck
kirk

Posted By: Speance
Date Posted: December 21, 2003 at 9:01 PM

Thanks Man

I actually figured it out this morning pretty quickly. There were actually four tabs and I ended up breaking one off, but it still snaps in place fine. Anyway thanks for the reply.

Speance

Print Page | Close Window