Print Page | Close Window

door lock wiring 1988 Merkur Scorpio

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23935
Printed Date: May 11, 2025 at 4:17 AM


Topic: door lock wiring 1988 Merkur Scorpio

Posted By: jhunter936
Subject: door lock wiring 1988 Merkur Scorpio
Date Posted: January 04, 2004 at 9:38 PM

Hi,
Anyone know the wiring codes for a 1988 Merkur Scorpio?
TIA,

Jeff



Replies:

Posted By: BNLUIS
Date Posted: January 04, 2004 at 10:12 PM

   POWER LOCK|yellow              |-  |driver's kick panel *1      |
|     POWER UNLOCK|white               |-  |driver's kick panel *1  

*1 Use relays - requires high current ground to operate



-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.




Posted By: jhunter936
Date Posted: January 04, 2004 at 10:47 PM
Thanks Luis,
But what is a 'high current' ground??

Jeff




Posted By: BNLUIS
Date Posted: January 04, 2004 at 11:03 PM
posted_image

-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.




Posted By: jhunter936
Date Posted: January 04, 2004 at 11:09 PM
Luis, your last reply didnt come through. Please post.
Also, I went back through 12volt and found this:
https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1988-89&make=Merkur&model=Scorpio&ID=18440&type=Alarm

This one says unlock is reverse polarity. How is that wired into an alarm?

Jeff




Posted By: BNLUIS
Date Posted: January 04, 2004 at 11:31 PM

go to the door lock section and see how to wire relays to give you a negative trigger Every where I look I see car as having negative locks that require a strong ground

Merkur


 

 

 

Scorpio


1988-1989

Alarm and Keyless  Entry Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Constant  +12 Volts:

 

RED

IGNITION SWITCH HARNESS

Starter  Kill:

 

BLACK/ BLUE

IGNITION SWITCH HARNESS

Ignition  +12 Volts:

 

BLACK / YELLOW

IGNITION SWITCH HARNESS

Dome  Lights/Superv:

 

BROWN / WHITE

(-) AT FUSE BOX OR COURTESY LIGHT

OEM Horn:

 

RED

(-) STEERING COLUMN HARNESS

Power  Lock:

 

YELLOW

DRIVER'S KICK PANEL *

Power  Unlock:

 

WHITE

DRIVER'S KICK PANEL *

Trunk  Release:

 

RED / GREEN (+)

RELEASE RELAY IN FUSE/JUNCTION BLOCK

Alarm  Input Wire:

 

BROWN / WHITE

(-) AT FUSE BOX OR COURTESY LIGHT

Notes:

* Door Locks Require A Hard Chassis Ground To Operate, Must Use Relays; See Note #201 - Negative Pulse Door Lock Diagram.


-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.





Print Page | Close Window