GM factory arming
Printed From: the12volt.comForum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24605
Printed Date: May 09, 2025 at 8:42 AM
Topic: GM factory arming
Posted By: corraudio
Subject: GM factory arming
Date Posted: January 14, 2004 at 9:57 PM
Replies:
Posted By: BNLUIS
Date Posted: January 14, 2004 at 10:05 PM
I,m not quite sure since i never really tried it, but I noticed if you lock it with the door open once you will hear a beep, then lock it a second time then it will lock doors and set factory alarm. So if you can make a set up with a timer and a double pulse module, to make it look as if the door were open while locking and second pulde will lock and set factory alrm. I guess it would work , but then agin seem like a lot work to me.these applis to all three cars. 
-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
Posted By: corraudio
Date Posted: January 14, 2004 at 10:16 PM
Posted By: BNLUIS
Date Posted: January 14, 2004 at 10:22 PM
yes I noticed I checed a few of my programs and they all dono,t list an arm wire, I guess it only arms by transmitter 
on of my programs say is a BLUE wire negative for the 2000 Impala, at door pin-pulse while,locking. good luck
-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
on of my programs say is a BLUE wire negative for the 2000 Impala, at door pin-pulse while,locking. good luck-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
Posted By: corraudio
Date Posted: January 14, 2004 at 10:32 PM