Remote Start Tach Wire

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2463
Printed Date: May 24, 2024 at 8:37 AM

Topic: Remote Start Tach Wire

Posted By: djezg
Subject: Remote Start Tach Wire
Date Posted: August 03, 2002 at 6:19 AM

I have a Autopage RS750LCD remote start alarm system on a 1988 Olds Cutlass Supreme. I'm trying to locate a connection on my car for the tach sensor wire. Can any body help me?

Replies:

Posted By: joyride2k
Date Posted: August 03, 2002 at 7:30 AM

If you can get to an injector you can use the negative side.

Posted By: djezg
Date Posted: August 03, 2002 at 5:01 PM

OK, according the Haynes auto repair manual for my car, There is a tach wire coming from the distributor cap (even though I do not have a tachometer). My ignition coil is built into the cap. Would it be good to connect the wire to the tach or should I use the negative wire coming from the ignition coil itself?

Posted By: 12voltlover
Date Posted: August 04, 2002 at 3:39 PM

It should be a white wire at ignition coil/distrubutor. Test for AC voltage with a multimeter - .5 volts - 1 volt at idle. Voltage will increase with throttle.

Print Page | Close Window