02 dodge ram alarm/remote start
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24856
Printed Date: May 01, 2025 at 8:36 PM
Topic: 02 dodge ram alarm/remote start
Posted By: ketelle
Subject: 02 dodge ram alarm/remote start
Date Posted: January 19, 2004 at 1:04 AM
wiring schematics for 02 dodge ram 1500 5.9 for a remote start alarm dome light wire,door pin wire,horn honk{best spot},power window wires. Every other helpful wire please. Thank You
Replies:
Posted By: boomer_106
Date Posted: January 19, 2004 at 11:07 AM
Remote Starter Wiring Colors and Notes | Function | | Vehicle Color | Location | Start: | | YELLOW | IGNITION SWITCH HARNESS | Ignition #1: | | BLUE (16 AWG) | IGNITION SWITCH HARNESS | Ignition #2: | | RED | IGNITION SWITCH HARNESS | Ignition #3: | | GREEN & ORANGE (2 WIRES) | IGNITION SWITCH HARNESS | Accessory: | | BLACK/ WHITE & BLUE (2 WIRES) | IGNITION SWITCH HARNESS | Brake Light: | | WHITE/ TAN | AT SWITCH ABOVE BRAKE PEDAL | Tach Signal: | | TAN/RED | AT IGNITION COIL | Parking Lights: | | PURPLE / YELLOW | HEADLIGHT SWITCH* | Headlights: | | PURPLE / YELLOW | HEADLIGHT SWITCH * | OEM Alarm Disarm: | | LT. GREEN/ ORANGE ***** | HARNESS COMING IN FROM DRIVER'S DOOR | OEM Alarm Arm: | | | | Diesel Glow Plug: | | ORANGE / Black | Powertrain Control Module*** | Clutch Bypass Wire: | | | | Notes: | | * This Is A Single Wire System. Parking Lights Need To See A Ground (-) Through A 330 Ohm Resistor. Headlights Need To See A Ground (-) Through A 700 Ohm Resistor. ** Diesel Vehicles - ORANGE / Black Wait to Start; Tach Wire Is Gray/Black. Both Wires Are Located In A Black Connector Center Top Of Fire Wall. There Are Two Black Connectors, The Correct One Does Not Have A White Insert. *** Tach can also be located at pin 74 behind instrument cluster. |
Alarm and Keyless Entry Wiring Colors and Notes | Function | | Vehicle Color | Location | Constant +12 Volts: | | PINK/BLACK | IGNITION SWITCH HARNESS | Starter Kill: | | YELLOW | IGNITION SWITCH HARNESS | Ignition +12 Volts: | | BLUE (16 AWG) | IGNITION SWITCH HARNESS | Dome Lights/Superv: | | SEE NOTE *** | | OEM Horn: | | BLACK/ RED (-) | STEERING COLUMN HARNESS | Power Lock: | | WHITE/ GREEN | DRIVER'S KICK PANEL **** | Power Unlock: | | WHITE/ GREEN | DRIVER'S KICK PANEL **** | Trunk Release: | | N/A | | Alarm Input Wire: | | SEE NOTE *** | | Notes: | | *** Separate Triggers For Each Door. The Driver's Door Trigger Is Tan (-). The Left Rear Door Trigger Is Tan/Orange (-). Both Wires Can Be Found In The Driver's Kick Panel. The Passenger Front Door Trigger Is Tan/Red (-) And the Passenger Rear Door Trigger Is Tan / YELLOW (-). Both Of These Wires Can Be Found In The Passenger Kick Panel. Diode Isolate Each Wire For Alarm Trigger With The Bands Facing Away From The Alarm/Remote Start Module. Use Only One Trigger For Dome Light Supervision. **** Single Wire Door Lock System See Note #211. Lock Requires A Ground (-) Pulse Through A 867 Ohm Resistor. Unlock Requires A Ground (-) Pulse Through A 364 Ohm Resistor. Diode Isolate One Of The Wires. ***** Requires A Negative Pulse Through A 1.5 K-Ohm Resistor. |
|