Print Page | Close Window

2000 Tundra Alarm Wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25519
Printed Date: May 05, 2024 at 1:26 AM


Topic: 2000 Tundra Alarm Wiring

Posted By: subeetech
Subject: 2000 Tundra Alarm Wiring
Date Posted: January 29, 2004 at 8:05 PM

I need wiring for factory RS3000 alarm ,to remove alarm..Thanks



Replies:

Posted By: Big Dog
Date Posted: January 30, 2004 at 11:03 AM
Try this:

POWER LOCK WHITE/ green - either kick panel    
POWER UNLOCK red / YELLOW - either kick panel    
FACTORY ALARM DISARM blue/black - drivers door harness

If you want to bypass the alarm permanently, see if there is a factory hood switch and see what signal it sends with the hood open. If it sends a ground then cut the wire and permanantly ground the wire. The system will never arm 'cause it'll think the hood is open!posted_image



-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.




Posted By: subeetech
Date Posted: January 30, 2004 at 8:15 PM

Thanks for fast reply..

We will try this..






Print Page | Close Window