Honda Civic/Bypass clutch safety switch

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25575
Printed Date: May 03, 2025 at 5:34 PM

Topic: Honda Civic/Bypass clutch safety switch

Posted By: crank12
Subject: Honda Civic/Bypass clutch safety switch
Date Posted: January 30, 2004 at 3:43 PM

I just installed Ultra Start 2256M [Remote Starter/Security for manual transmission] Anyone can help me locate the right wire to tap the Starter Output. In the instruction it says "to the wire from clutch safety switch that goes to the starter". I tried each one but never get started using the remote. [not to mention I have it set to reservation mode].. also the security and keyless entry are working just fine.. To anybody who had done this before please give me a hand. Thanks!!!

Vehicle Info: 1999 Honda Civic EX

Replies:

Posted By: technodigifreak
Date Posted: January 30, 2004 at 8:34 PM

go to honda-acura.net and ask fro a wiring diagram

and don't tell them you are hooking up a remote start on a manual--you'll get majorly flamed

-------------
Hot-Modder

Posted By: whitey
Date Posted: February 14, 2004 at 10:35 AM

at the clutch swithch there is a blue/black wire. Hook your status - out when running to this wire. Hook your starter output wire from the unit up to the BLACK/ white wire at the igniton harness.

That will make it work

-------------
Visions Edmonton
Installation Manager, DLS
MECP Certified First Class