Print Page | Close Window

factory bypass ?

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26703
Printed Date: May 10, 2025 at 11:03 PM


Topic: factory bypass ?

Posted By: perm79
Subject: factory bypass ?
Date Posted: February 18, 2004 at 4:52 AM

i have a 91 acura legend sadan and i bought a keyless entry . i want to iinstall but im wondering if the car already has what im going to install or not and if i have to bipass any thing. newby thanks




Replies:

Posted By: boomer_106
Date Posted: February 19, 2004 at 12:27 PM

Acura

Legend Sedan

1991-1993

Remote Starter  Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Start:

 

BLACK/ WHITE

IGNITION SWITCH HARNESS

Ignition  #1:

 

BLACK / YELLOW

IGNITION SWITCH HARNESS

Ignition #2:

 

YELLOW

IGNITION SWITCH HARNESS

Ignition  #3:

 

N/A

Accessory:

 

WHITE/ RED

IGNITION SWITCH HARNESS

Brake  Light:

 

GREEN / WHITE (+)

SWITCH ON BRAKE PEDAL BRACKET

Tach  Signal:

 

BLUE

AT TACH TEST CONNECTOR *

Parking Lights:

 

RED / BLACK (+)

DRIVER KICK PANEL

Headlights:

 

BLUE/RED (-)

HEADLIGHT SWITCH OR AT RELAY

OEM Alarm  Disarm:

 

GREEN/ RED (-)

SECURITY MODULE UNDER DRIVER'S DASH

OEM Alarm  Arm:

 

GREEN/ YELLOW (-)

RIGHT SIDE OF STEERING WHEEL

Diesel  Glow Plug:

 

Clutch  Bypass Wire:

 

Notes:

 * Tach Test Connector (2 Pin White Plug) Is Located On Passenger Rear Of Engine Compartment On Passenger Strut Tower.

Acura

Legend Sedan

1991-1993

Alarm and Keyless  Entry Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Constant  +12 Volts:

 

WHITE

IGNITION SWITCH HARNESS

Starter  Kill:

 

BLACK/ WHITE

IGNITION SWITCH HARNESS

Ignition  +12 Volts:

 

BLACK / YELLOW

IGNITION SWITCH HARNESS

Dome  Lights/Superv:

 

BLACK/ WHITE (-)

DRIVER "B" POST

OEM Horn:

 

BLUE/RED (-)

PIN # 8 OF # PIN CONN. OF SECURTY MOD

Power  Lock:

 

GREEN / WHITE (-)

AT DOOR LOCK MODULE BEHIND DRIVER'S

Power  Unlock:

 

GREEN/ RED (-)

DASH TO RIGHT OF STEERING COLUMN**

Trunk  Release:

 

WHITE/ BLACK/ GOLD DOTS

(+) DRIVER'S KICK ***

Alarm  Input Wire:

 

BLACK/ WHITE (-)

DRIVER "B" POST

Notes:

** See Note #201- Negative Pulse Door Lock Diagram. *** See Note # 232 Positive



Posted By: Teamrf
Date Posted: February 19, 2004 at 7:20 PM
From the tech sheet someone posted doesn't look like you have any bypassing to do. Goodluck...

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.



Posted By: perm79
Date Posted: February 28, 2004 at 5:19 PM

thanks,

 is this all i need to do for install? do i need to disable factory alarm? do i need to run any relays?

thank for the help




Posted By: boomer_106
Date Posted: February 28, 2004 at 7:56 PM

Ya according to the sheet you need to disarm the factory alarm.  You can see it listed as OEM alarm disarm. If you dont when you open your doors the alarm will go off. Whether you need relays depends on the keyless system you bought. You should have stated what it was and you may have gotten more help. To get the best help always give the make and model of the system as well as the make and model for the car. The instructions that came with it will probably tell you. Good luck


Print Page | Close Window