2002 Chrysler Sebring Alarm/Remote Start Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26788
Printed Date: April 25, 2024 at 6:11 PM
Topic: 2002 Chrysler Sebring Alarm/Remote Start Wiring
Posted By: sickstyles
Subject: 2002 Chrysler Sebring Alarm/Remote Start Wiring
Date Posted: February 19, 2004 at 11:45 AM
Im installing a remote starter in 2002 sebring 4dr. I cant find the tach wire or a few of the ignition accesory wires i need, if anyone has any information on the car or the colors of the wires please help me out.
thanks, andy
Replies:
Posted By: boomer_106
Date Posted: February 19, 2004 at 12:19 PM
Does this help? Chrysler | Sebring Sedan | 2001-2002 |
Remote Starter Wiring Colors and Notes | Function | | Vehicle Color | Location | Start: | | YELLOW | IGNITION SWITCH HARNESS | Ignition #1: | | BLUE | IGNITION SWITCH HARNESS* | Ignition #2: | | GREEN/ RED (SMALL) | IGNITION SWITCH HARNESS | Ignition #3: | | N/A | | Accessory: | | BLACK/ ORANGE & BLACK/ WHITE | IGNITION SWITCH HARNESS | Brake Light: | | WHITE/ TAN (+) | AT SWITCH ABOVE BRAKE PEDAL | Tach Signal: | | ANY WIRE AT COIL OR INJECTOR | THAT IS NOT GREEN OR LT. GREEN | Parking Lights: | | BLACK / YELLOW (+) | AT HEADLIGHT SWITCH | Headlights: | | PURPLE / WHITE (+) | AT HEADLIGHT SWITCH | OEM Alarm Disarm: | | LT. GREEN/ ORANGE | IN A # PIN CONNECTOR AT BCM ** | OEM Alarm Arm: | | LT. GREEN/ ORANGE | IN A # PIN CONNECTOR AT BCM ** | Diesel Glow Plug: | | N/A | | Clutch Bypass Wire: | | N/A | | Notes: | | * This Vehicle Is Equipped Wiith Chrysler's Smart Key Engine Immobilizer. Use Universal Alarm Bypass Module part # 2x402 where X can be any number. **The Body Control Module (BCM) is attached to the fuse/relay box at the end of the dash on the drivers side. |
Chrysler | Sebring Sedan | 2001-2002 |
Alarm and Keyless Entry Wiring Colors and Notes | Function | | Vehicle Color | Location | Constant +12 Volts: | | PINK/BLACK | IGNITION SWITCH HARNESS | Starter Kill: | | YELLOW | IGNITION SWITCH HARNESS | Ignition +12 Volts: | | BLUE | IGNITION SWITCH HARNESS* | Dome Lights/Superv: | | TAN & TAN/RED (-) | IN A # PIN CONNECTOR AT BCM ** | OEM Horn: | | BLACK/ RED (-) | STEERING COLUMN HARNESS | Power Lock: | | WHITE/ GREEN | IN A # PIN CONNECTOR AT BCM ** ' *** | Power Unlock: | | WHITE/ GREEN | IN A # PIN CONNECTOR AT BCM ** ' *** | Trunk Release: | | BLACK/ WHITE (5-WIRE) | IN A # PIN CONNECTOR AT BCM ** | Alarm Input Wire: | | TAN & TAN/RED (-) | IN A # PIN CONNECTOR AT BCM ** | Notes: | | *** Lock is positive trigger through a 1800 ohm resistor. Unlock is positive trigger through a 750 ohm resistor. |
Posted By: sickstyles
Date Posted: February 19, 2004 at 12:47 PM
Thanks for the wiring info, as for the bypass. I purchased a dei 555U. What company makes the one you described, or is it something i can build with resistors?
Posted By: boomer_106
Date Posted: February 19, 2004 at 12:59 PM
I believe its made by design tech. Since you already bought one I would just use what you have provided its the correct one for your vehicle.
|