Looking to do an install this weekend of an alarm in this truck. Could you please find the wiring for me. Thanks!
Chevrolet | Pickup - Fullsize | 1996-1998 |
Remote Starter Wiring Colors and Notes |
Function | | | Vehicle Color | Location |
Start: | | | YELLOW | IGNITION SWITCH HARNESS * |
Ignition #1: | | | PINK | IGNITION SWITCH HARNESS |
Ignition #2: | | | PNK/WHT or WHT | IGNITION SWITCH HARNESS(ECM) |
Ignition #3: | | | N/A | |
Accessory: | | | ORANGE | IGNITION SWITCH HARNESS (HEAT/AC) |
Brake Light: | | | WHITE (+) | AT SWITCH ABOVE BRAKE PEDAL |
Tach Signal: | | | WHITE | AT COIL ON PASSENGER REAR OF ENGINE |
Parking Lights: | | | BROWN (+) | AT HEADLIGHT SWITCH |
Headlights: | | | YELLOW (+) | AT HEALIGHT SWITCH |
OEM Alarm Disarm: | | | N/A | IN SCHEMATICS |
OEM Alarm Arm: | | | N/A | NO OEM ALARM PRESENT |
Diesel Glow Plug: | | | | |
Clutch Bypass Wire: | | | | |
Notes: | | * 1998 Vehicles Are Equipped With GM's PASSLOCK II Anti-Theft System; See Note #113. |
Chevrolet | Pickup - Fullsize | 1996-1998 |
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | | Vehicle Color | Location |
Constant +12 Volts: | | | RED (2) | IGNITION SWITCH HARNESS |
Starter Kill: | | | YELLOW | IGNITION SWITCH HARNESS * |
Ignition +12 Volts: | | | PINK | IGNITION SWITCH HARNESS |
Dome Lights/Superv: | | | PURPLE (-) | 4 PIN BLACK CONN. IN DR. KICK PANEL ** |
OEM Horn: | | | BLACK (-) | STEERING COLUMN HARNESS |
Power Lock: | | | L BLUE | DRIVER'S KICK PANEL IN BODY CAVITY *** |
Power Unlock: | | | WHITE | DRIVER'S KICK PANEL IN BODY CAVITY *** |
Trunk Release: | | | N/A | |
Alarm Input Wire: | | | PURPLE (-) | 4 PIN BLACK CONN. IN DR. KICK PANEL ** |
Notes: | | ** PURPLE (-) Wire Also Located At Headlight Switch. WHITE (-) Wire At Courtesy Light Can Also Be Used But Will Not Trigger Alarm If Dome Lamp Override Switch Is Turned On. *** Without OEM Keyless Reverse Polarity Door Lock Diagram. With OEM Keyless Positive Pulse Door Lock Diagram. |
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
The truck doesn't have any keyless entry so which wires do I put the alarm wires to? Please help!