BMW 5 series and pontiac grand am 1999
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27780
Printed Date: May 13, 2025 at 3:12 PM
Topic: BMW 5 series and pontiac grand am 1999
Posted By: mbiker1
Subject: BMW 5 series and pontiac grand am 1999
Date Posted: March 05, 2004 at 12:15 PM
I need a wiring diagram for a bmw 5 series. This is for a equalizer so i need only stero components. For the 99 grand am i need a complete wiring diagram for a alram system.
Replies:
Posted By: boomer_106
Date Posted: March 05, 2004 at 7:33 PM
Remote Starter Wiring Colors and Notes | Function | | Vehicle Color | Location | Start: | | YELLOW | IGNITION SWITCH HARNESS * | Ignition #1: | | PINK | IGNITION SWITCH HARNESS | Ignition #2: | | DK.GREEN | IGNITION SWITCH HARNESS | Ignition #3: | | N/A | | Accessory: | | ORANGE | IGNITON SWITCH HARNESS | Brake Light: | | LT. BLUE | CONNECTOR IN DRIVER'S KICK PANEL | Tach Signal: | | WHITE | AT TOP OF ENGINE | Parking Lights: | | BROWN (+) | STEERING COLUMN HARNESS | Headlights: | | YELLOW (+) | STEERING COLUMN HARNESS | OEM Alarm Disarm: | | | | OEM Alarm Arm: | | | | Diesel Glow Plug: | | | | Clutch Bypass Wire: | | | | Notes: | | * This vehicle is equipped with GM's Passlock II Anti-Theft System. See Note #113 to bypass this system. |
Alarm and Keyless Entry Wiring Colors and Notes | Function | | Vehicle Color | Location | Constant +12 Volts: | | RED | IGNITION SWITCH HARNESS | Starter Kill: | | YELLOW | IGNITION SWITCH HARNESS * | Ignition +12 Volts: | | PINK | IGNITION SWITCH HARNESS | Dome Lights/Superv: | | LT. BLUE & GRN/BLK (-) | AT BCM LOCATED UNDER PASS. DASH *** | OEM Horn: | | BLACK (-) | STEERING COLUMN HARNESS | Power Lock: | | WHITE | SINGLE WIRE LOCK SYSTEM ** | Power Unlock: | | WHITE | SINGLE WIRE LOCK SYSTEM | Trunk Release: | | BLACK/ WHITE (-) | DRIVER'S KICK PANEL | Alarm Input Wire: | | LT. BLUE & GRN/BLK (-) | AT BCM LOCATED UNDER PASS. DASH *** | Notes: | | **This vehicle is equipped with a single wire door lock system. To LOCK, WHITE wire must be receive a ground pulse. To UNLOCK, same WHITE wire must receive a ground pulse through a 1.5 K ohm resistor. The WHITE wire is located in the connector in driver's kick panel. See Note #211 Negative Trigger Single Wire Door Locks *** Driver's Door is GREEN/ Black and all Remaining Doors are Lt. Blue. Diode Isolate Both Wires With The Band Facing Away From the Alarm Module. |
Posted By: auex
Date Posted: March 06, 2004 at 10:33 PM
I would ask why would you need/want to install an equalizer into a 5 series. The vehicle has an factory amplifier that already crosses over the speaker outputs, depending on year which we would need to know for the stereo wiring.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: mbiker1
Date Posted: March 07, 2004 at 4:32 PM
The guy i am putting the equalizer in for wants to be able to controll the settings precisely. That is why he wants an equalizer. The BMW is a 1998, 528i
Posted By: auex
Date Posted: March 08, 2004 at 7:25 PM
Tell him that it isn't possible, or worth it, unless he replaces the factory radio and amplifiers. Also is it the factory deck or aftermarket equiptment? Are you trying to tie the eq into the factory wiring between the factory deck and factory amplifier, if so tell him no?
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
|