03 F350 Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29748
Printed Date: May 13, 2024 at 4:50 PM
Topic: 03 F350 Wiring
Posted By: sound decision
Subject: 03 F350 Wiring
Date Posted: April 05, 2004 at 6:51 PM
Looking to put in an alarm and remote start in.
any help with the wiring will be great.
thanks in advance
Replies:
Posted By: boomer_106
Date Posted: April 05, 2004 at 10:53 PM
Here ya go bud. Ford | Pickup - Fullsize | 2003 |
Remote Starter Wiring Colors and Notes | Function | | Vehicle Color | Location | Start: | | RED / Blue | Ignition Switch Harness* | Ignition #1: | | Blue/Green | Ignition Switch Harness | Ignition #2: | | Gray / YELLOW | Ignition Switch Harness | Ignition #3: | | RED / Black | Ignition Switch Harness **** | Accessory: | | BLACK/ Green | Ignition Switch Harness | Brake Light: | | Green | At Brake Switch | Tach Signal: | | Blue/Green or GREEN / WHITE | At Coil Pack On Engine | Parking Lights: | | Brown (+) | At Headlight Switch | Headlights: | | RED / Yellow | At Headlight Switch | OEM Alarm Disarm: | | GREEN/ Purple | Drivers Kick Panel | OEM Alarm Arm: | | No Color Available | Please call with information | Diesel Glow Plug: | | No Color Available | Please call with information | Clutch Bypass Wire: | | No Color Available | Please call with information | Notes: | | *Most models equipped with Transponder Anti-Theft System - Use Universal Alarm Bypass Module. ****All DesignTech remote starters except the 2xx22 have an ignition 3 output - it is the WHITE/ black in the 'control harness.' This wire will be used to control a relay which will power ignition 3. It will also be used to control the bypass module, if needed. |
Ford | Pickup - Fullsize | 2003 |
Alarm and Keyless Entry Wiring Colors and Notes | Function | | Vehicle Color | Location | Constant +12 Volts: | | Yellow and GREEN/ Purple | Ignition Switch Harness | Starter Kill: | | RED / Blue | Ignition Switch Harness* | Ignition +12 Volts: | | Blue/Green | Ignition Switch Harness | Dome Lights/Superv: | | BLACK/ Blue | Passenger Kick Panel* | OEM Horn: | | Dark Blue | Plug to right of Steering Column Harnessing column** | Power Lock: | | Pink / YELLOW | Driver Kick Panel*** | Power Unlock: | | Pink/Green | Above Parking Brake | Trunk Release: | | N/A | | Alarm Input Wire: | | BLACK/ Blue | Passenger Kick Panel* | Notes: | | * For alarm trigger use passenger kick panel location. For domelight supervision only it is ok to use drivers kick panel location. ** CAUTION ON THE HORN - The Plug containing horn wire also has air-bag wires! The correct Blue wire for horn will measure 12 volts when you are NOT pressing the horn. The wire will measure zero volts when the horn is sounding. USE EXTREME CAUTION WHEN TESTING! USE ONLY A DIGITAL MULTI-METER SET FOR DC VOLTS! FAILURE TO TEST PROPERLY CAN RESULT IN AIR-BAG INFLATION/DAMAGE AND PERSONAL INJURY/PROPERTY DAMAGE. ***With OEM Keyless the lock system is negative trigger. Without, the system is reverse polarity - see Note #203 |
Posted By: sound decision
Date Posted: April 06, 2004 at 12:16 AM
thanks for the help...
|