2001 Ford Excursion Alarm/Remote Start Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30956
Printed Date: April 29, 2024 at 1:28 PM
Topic: 2001 Ford Excursion Alarm/Remote Start Wiring
Posted By: shylatino
Subject: 2001 Ford Excursion Alarm/Remote Start Wiring
Date Posted: April 24, 2004 at 1:30 PM
DOES ANY BODY HAVE A WIRING DIAGRAM FOR A ford 2001 excursion not just for the radio but the whole system i need to install a avicn1 thats needs to plug into the vss wire and the reverse lights would like to know here the wires are inside the cabin
Replies:
Posted By: boomer_106
Date Posted: April 24, 2004 at 11:21 PM
Remote Starter Wiring Colors and Notes | Function | | Vehicle Color | Location | Start: | | RED / BLUE | IGNITION SWITCH HARNESS * | Ignition #1: | | RED / BLACK (THICK) | IGNITION SWITCH HARNESS | Ignition #2: | | GRAY / YELLOW | IGNITION SWITCH HARNESS | Ignition #3: | | RED / BLK (THINNER) | IGNITION SWITCH HARNESS*** | Accessory: | | BLACK/ LT. GREEN | IGNITION SWITCH HARNESS | Brake Light: | | LT. GREEN | AT SWITCH ABOVE BRAKE PEDAL | Tach Signal: | | WHITE/ PINK | AT BACK OF INSTRUMENT PANEL | Parking Lights: | | BROWN | AT LIGHT SWITCH | Headlights: | | | | OEM Alarm Disarm: | | DK. GREEN/ PURPLE (-) | IN DRIVER'S KICK PANEL | OEM Alarm Arm: | | ARMS WHEN VEHICLE IS | LOCKED WITH DR. DOOR OPEN | Diesel Glow Plug: | | BLACK/ PINK | AT BACK OF INSTRUMENT PANEL | Clutch Bypass Wire: | | | | Notes: | | * This Vehicle May Be Equipped With Ford's PATS Anti-Theft System. See Installation Note #144 - Bypassing Transponder Theft Systems.*** Igntion 3 from the remote start will power both the relay (for the vehicle's ign3) and the bypass module. No Diode Isolation is needed. All DesignTech remote starters except the 2xx22 have an ignition 3 as a WHITE/ black in the control harness. |
Alarm and Keyless Entry Wiring Colors and Notes | Function | | Vehicle Color | Location | Constant +12 Volts: | | YELLOW/LT. GREEN/ PURPLE | IGNITION SWITCH HARNESS | Starter Kill: | | RED / BLUE | IGNITION SWITCH HARNESS * | Ignition +12 Volts: | | RED / BLACK (THICK) | IGNITION SWITCH HARNESS | Dome Lights/Superv: | | BLACK/ LT. BLUE (-) | IN DRIVER'S KICK PANEL | OEM Horn: | | YELLOW /GREEN (-) | IN AIR BAG HARNESS | Power Lock: | | PINK / YELLOW | Passenger Kick Panel** | Power Unlock: | | PINK/GREEN | Passenger Kick Panel** | Trunk Release: | | N/A | | Alarm Input Wire: | | BLACK/ LT. BLUE (-) | IN DRIVER'S KICK PANEL | Notes: | | ** Wires may be positive, negative, or reverse polarity. Must Test! See Note# 201, Note #202, and Note #203 |
|