I just picked up the databus module for the door locks, for 40 bucks, and I have the passlock II module.. The Alarm I am installing is the AudioVox APS 996C. If at all possible do you think you can come up w/ a diagram or schematic on how the passlock II module needs to be wired w/ the Starter Ignition relay, Im confused w/ this matter now that there is 3 ignition wires that have to be dealt w/. Anything you might beable to draw up for me would definately help. This is a 04 Reg Cab Silverado Base model, and I would hate to have to find crap out the hard way. I have everything else figured out, I am just not 100 percent sure yet of that passlock II wiring. Any more help would be seriously appreciated, I wouldnt even know what to do w/ myself if you could draw up a schematic for me on that issue. Hehe. Thanks again
-------------
Kyle Newton
I've got a Directed Valet 562T remote starter on my 2004 Silverado and found the installation guide on Directed's web site. You'll need something that can read Adobe Acrobat files (pdf) https://www.directed.com/guides/manuals/ig/valet/N562T_6-03.pdf On the bottom of page 25 is a diagram of the VATS. I'm not sure if that is exactly how it was installed in my truck b/c it's one of the few things that I didn't do myself, but I'm thinking that it might help ya out.
-------------
-SpArX
what databuss mod do you have and what passlock bypass is it need to know the bypass to help ya
-------------
tj