I need to know my wire color and location for those signal.
- Glowplug (Wait to Start)
- Tach
All chart is talking about the blue connector on the back of the cluster.
But i can find any color specified on those chart.
PLEASE I NEED HELP.
DAVID
OEM alarm module: Found high in driver's kick panel just to the left of the steering column. Hoodpin is found in the left plug, Doorpin & Trunkpin are found in the right plug.
Parking lights are independent left and right and must be isolated with diodes or relays. Gray/ Orange, and Gray/Purple. See diagram for proper connection.
Doorlocks, Arm & Disarm: These wires are found inside the Driver's door, in harness coming from the door latch. If given a longer (-) pulse, Lock will roll up the windows ,and Unlock will roll the windows down. note: Test for these wires by turning the key in the Driver's door cylinder ( and NOT the switch in the door).
Parking Brake: BROWN / Yellow (-), Found at Relay # 173, in the relay bank, in Driver's kick panel.
Clutch Bypass location: Behind the Relay Bank, Direct feed: RED / Black (+), or at Clutch Switch.
Tach: GREEN/ Brown (AC) in the Left plug (Blue) on back side of Instrument Cluster.
Alternate Tach Location: White (AC) in 2 pin connector at Crank Sensor, Front of motor near the bottom.
Glow Plug: Blue/ Green (-) in the Left plug (Blue) on back side of Instrument Cluster. See Diagram for pro connection.
Alternate Glow Plug: "Time out" the Glow plug wire. See Installation guide for proper connection.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA