2003 Dodge Sprinter Alarm/Remote Start Wiring

Can someone please post a 2003 Dodge Sprinter alarm/remote start wiring diagram?  Thanks.

12volts red (100A) + ignition harness Starter BLACK / YELLOW + ignition harness Second Starter N/A Ignition black + ignition harness Second Ignition BLACK/ red + ignition harness Third Ignition N/A Accessory gray/dk. green + ignition harness Second Accessory N/A Keysense blue/black - ignition harness Power Lock WHITE/ yellow - sw on dash or CTM, pink plug, pin 7 Power Unlock same wire as power lock Lock Motor blue/red 5wi DKP or CTM, pink plug, pin 2 Unlock Motor BLACK/ red 5wi DKP or CTM, pink plug, pin 3 Parking Lights+ gray/black (L), gray/red (R) + fuse box, blk 15 pin plug, pin 4 & 6 Parking Lights- N/A Hazards dk. GREEN/ YELLOW - SKREEM, pin 10 Turn Signal(L) BLACK/ white + fuse box, blk 15 pin plug, pin 8 Turn Signal(R) BLACK/ dk. green + fuse box, blk 15 pin plug, pin 5 Reverse Light WHITE/ red + blk 12 pin plug under cluster, pin 1 Door Trigger BROWN / white - driver kick, door harness Dome Supervision same as door trigger wire Trunk/Hatch Pin BROWN / white - rear pin switch or interior light Hood Pin BLACK/ blue pin switch or SSM, brn plug, pin 14 Trunk/Hatch Release N/A Power Sliding Door N/A Factory Alarm Arm red - DKP or SSM, brown plug, pin 21 Factory Alarm Disarm black - DKP or SSM, brown plug, pin 20 Disarm No Unlock see factory alarm disarm Tachometer dk. GREEN/ YELLOW ac data link connector, pin 3 Wait to start Brake Wire BLACK/ red + brake pedal switch Parking Brake BROWN / black - parking brake switch Horn Trigger BLACK / YELLOW - steering column Memory Seat 1 N/A Memory Seat 2 N/A Memory Seat 3 N/A Immobilizer Bypass Module

MAKE : DODGE | MODEL : SPRINTER | YEAR : 2004

-------------
Do it right the first time

thank you very much!!!!!!