2004 Pontiac Vibe Alarm Wiring Diagram and VSS
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33385
Printed Date: April 24, 2024 at 6:10 PM
Topic: 2004 Pontiac Vibe Alarm Wiring Diagram and VSS
Posted By: smoofcool
Subject: 2004 Pontiac Vibe Alarm Wiring Diagram and VSS
Date Posted: June 05, 2004 at 9:57 PM
i need a wiring diagram for a pontiac vibe i want to install cruise control to it. i also would like to know the color of the wire for the VSS thanks any help would be appreciated.
Replies:
Posted By: jfk51502003
Date Posted: June 09, 2004 at 10:10 AM
DIRECTWIRE™ WIRING INFORMATION - PONTIAC / VIBE / 2004 / Remote Start
[PRINT THIS PAGE]
| 12volts | white (25A) & black (15A) | + | ignition harness | | Starter | red | + | ignition harness | | Second Starter | N/A | | | | Ignition | BLACK/ white | + | ignition harness | | Second Ignition | BLACK / YELLOW | + | ignition harness | | Third Ignition | N/A | | | | Accessory | blue/red | + | ignition harness | | Second Accessory | N/A | | | | Keysense | blue/black | - | ignition harness | | Notes: Using the status output to trigger this wire during remote start will disarm the factory alarm without unlocking the doors. | | Power Lock | green | - | driver kick, blue 12 pin plug | | Notes: Meter these wires while turning the key in the driver door key cylinder. | | Power Unlock | blue / YELLOW | - | driver kick, blue 12 pin plug | Notes: Meter these wires while turning the key in the driver door key cylinder. Unlock requires a double pulse.
Can also use the passenger door key cylinder wire for unlock, which only requires a single pulse. It is blue/black (-) in the passenger kick in a blue 12 pin plug. | | Lock Motor | blue | 5wi | driver kick, blue 12 pin plug | | Unlock Motor | red | 5wi | driver kick, blue 12 pin plug | | Parking Lights+ | green | + | driver kick, harness to rear | | Parking Lights- | GREEN / WHITE | - | headlight switch | | Hazards | yellow/black | - | flasher relay left of fuse box | | Turn Signal(L) | GREEN/ black | + | flasher relay left of fuse box | | Turn Signal(R) | GREEN/ YELLOW | + | flasher relay left of fuse box | | Reverse Light | RED / black | + | front of fuse box, 10 pin plug | | Door Trigger | RED / white | - | interior light switch on dash | | Dome Supervision | comes on with unlock | | | | Trunk/Hatch Pin | common with door trigger | | | | Hood Pin | N/A | | | | Trunk/Hatch Release | blue/white | - | release switch on dash | | Power Sliding Door | N/A | | | | Factory Alarm Arm | arms with lock | | | | Factory Alarm Disarm | disarms with unlock | | | | Disarm No Unlock | use key sense wire | | | | Tachometer | black | ac | pin 5, conn. E6 at ECM | | Notes: The ECM (Engine Control Module) is behind the glove box. Connector E6 is the plug on the right. | | Wait to start | N/A | | | | Brake Wire | GREEN / WHITE | + | brake pedal switch | | Parking Brake | RED / black | - | parking brake switch | | Horn Trigger | GREEN/ YELLOW | - | steering column | | Memory Seat 1 | N/A | | | | Memory Seat 2 | N/A | | | | Memory Seat 3 | N/A | | |
| Immobilizer Bypass Module: | Required: No | Type: N/A | Part #: N/A | | Notes: N/A |
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information. |
|
|