1995 GMC Sierra 1500

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3344
Printed Date: May 01, 2025 at 12:08 PM

Topic: 1995 GMC Sierra 1500

Posted By: klallisonjr
Subject: 1995 GMC Sierra 1500
Date Posted: September 05, 2002 at 2:48 AM

During installation of a brake controller for a trailer, I managed to damage something??? causing the shift lever for the transmission to lock up. I have no brake lights at all now. All fuses are intact. Access to the wiring is difficult as there is virtually no "extra" length to pull down. Where is the actual brake light switch? Could I have pulled a connector loose there? I do know that if the wiring to the switch is interrupted, the release for the transmission lever does not function. Maybe a wiring diagram would help? Thanks.

-------------
Keith<br><br>
Knoxville, TN

Replies:

Posted By: Velocity Motors
Date Posted: September 05, 2002 at 4:58 AM

Did you check the bulbs to see if you may have blown the bulbs if the fuses are fine ??

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: lalur
Date Posted: September 06, 2002 at 7:22 PM

did u look at were the brake wires and brake lights ccome out of the brake pedal sometimes this gets knocked loose and most atoumatics want shift out of gear without the brake being pushed in

-------------
any help ask