Print Page | Close Window

remote start for older cutlass

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34781
Printed Date: October 31, 2024 at 6:25 PM


Topic: remote start for older cutlass

Posted By: powerhx2
Subject: remote start for older cutlass
Date Posted: June 29, 2004 at 2:51 AM

i want to hook up my remote start to my old 1980 oldsmobile cutlass and cannot find the correct wires for the life of me

i have the rest of the alarm in and i just want to put the rest of in.

i have the viper 790xv. i have the wire colors that i need buy cannot find them. the wire guide says ( at ignition switch harness) i just want to know if these wires are behind the fuse box in the huge bundel of wires???????

                                                     thanks



-------------
kvt-911dvd
2 Autotek Stealth xs.1500's
2 yellow top
2 MTX 3'' 2 ways
2 6x9 alpine type r's
2 15's poweramper xp^2
alpine mrv-f407 4 channel
150 amp anl fuse



Replies:

Posted By: swamprat323
Date Posted: June 29, 2004 at 7:54 PM
The ignition switch harness is after your key switch.




Posted By: powerhx2
Date Posted: June 30, 2004 at 2:58 PM
is it the ribbin of wires ryte on the steering collum and they are all next to each other.....i tryed to cut the wire to see if the car wouldnt start and it did.  i cut the pink and it started and then i put that wire back together and thei cut the purple and it still started???????/

-------------
kvt-911dvd
2 Autotek Stealth xs.1500's
2 yellow top
2 MTX 3'' 2 ways
2 6x9 alpine type r's
2 15's poweramper xp^2
alpine mrv-f407 4 channel
150 amp anl fuse





Print Page | Close Window