Print Page | Close Window

Alarm in a Probe

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3520
Printed Date: June 20, 2025 at 5:58 PM


Topic: Alarm in a Probe

Posted By: Fruhead
Subject: Alarm in a Probe
Date Posted: September 10, 2002 at 11:12 PM

I've been trying to wire in an alarm for a 95 probe, and just found out the the locks are 1 wire, which helps... I was going crazy trying to figure out how to get the locks to work. My next problem is the parking lights. When they're off, the switch has current, and when they're on, they don't. Which wire do I tap into for the parking lights to flash, and also, which exactly should I connect the lock and unlock outputs to?

Thanks!




Replies:

Posted By: Velocity Motors
Date Posted: September 11, 2002 at 12:22 AM

 PARKING LIGHTSis a brown  wire found at the driver kick panel .

posted_image



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window