2000 ford mustang with PATS

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36164
Printed Date: July 15, 2025 at 2:59 PM

Topic: 2000 ford mustang with PATS

Posted By: bd_129
Subject: 2000 ford mustang with PATS
Date Posted: July 25, 2004 at 10:25 PM

I just wanted a little help, i installed a remote start to my mustang and know i'm trying to install a 555p interface module but i don't know the location of some wires. instr. say that i need to tap immobilizer pin#3 . i don't know the location of this wires. can someone help

Replies:

Posted By: dc-auto
Date Posted: July 27, 2004 at 10:57 PM

I'm not 100% , I've never used this bypass but usually if you take the plastic off the column you can find usually a 3 or 4 pin plug right around the key cylnder.

-------------
dc-auto

Remember it's just Ohms Law

Posted By: bd_129
Date Posted: August 09, 2004 at 9:53 PM

Sorry i had not posted any reply i had to go out of town. but getting back to you guys. I've forgot to mentioned that i'm not familiar with the installation of the bypass can any body kind of guide me on how to do this and were can i find wire, and maybe what color. i'll appreciate all info given.

Print Page | Close Window