Subs into a 350 Z
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36862
Printed Date: May 05, 2024 at 8:59 AM
Topic: Subs into a 350 Z
Posted By: sound decision
Subject: Subs into a 350 Z
Date Posted: August 05, 2004 at 9:39 PM
I am going to put in amps and subs into a new 350z. I looked at it earlier this week and it doesn't look to bad. the question i have is....whats it like putting the power wire througt the firewall. it looks tight. if anyone can remember what they did please let me know. if not...i guess i'll figure it out.
thanks in advance
Replies:
Posted By: switch_hitter
Date Posted: August 05, 2004 at 10:03 PM
If you can't find an existing hole in the fire wall, you can drill a hole, and put a plastic grommet in , and then your wire. Worst case scenario run it underneath the car through the frame.
Posted By: sound decision
Date Posted: August 06, 2004 at 10:08 AM
I know that I can drill a hole or do something like that. What I am wondering is if anyone remembers a good spot to put a wire through. With it being that tight in there I was hoping someone can lead me to a good spot.
Thanks for the help.....
Posted By: rolln_on_em
Date Posted: August 07, 2004 at 6:04 PM
there should be a factory grommet by battery, or other sdide by fuse box, if not it has been a while siince ive done one, but I do remember it wasnt hard to drill a hole if I had to
-------------
Yeah I drive a slow car; but damn it looks good
|