Print Page | Close Window

2004 Hyundai Santa Fe Brake Light Wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37435
Printed Date: June 11, 2024 at 7:21 AM


Topic: 2004 Hyundai Santa Fe Brake Light Wiring

Posted By: alisam
Subject: 2004 Hyundai Santa Fe Brake Light Wiring
Date Posted: August 15, 2004 at 4:14 PM

I'm installing a Voyager brake box (for trailer brakes) and the instructions say "connect the red wire to the cold side of the brake light switch".  I think I figured out which side is hot and which side is cold, but I want to make sure I've got the wire to the controller in the right place.  There are 4 wires on the brake light switch wiring assembly. (in order from top left clockwise)  light GREEN/ black, light green,  black, white.  The light green is hot.  The black is ground.  The light green and black is only hot when the brake pedal is depressed and the white one???  don't know.   Can anyone send me a wiring diagram or tell me where to find one? 

-------------
Thanks! :) Lisa



Replies:

Posted By: D.Russell
Date Posted: August 15, 2004 at 5:46 PM

Don't know if this will help ?

https://www.designtech-intl.com/Content/techsupport/wirecolors/VehicleDetail?modelID=1656




Posted By: alisam
Date Posted: August 16, 2004 at 7:43 AM
That helped, thank you.

-------------
Thanks! :) Lisa


Print Page | Close Window