1998 Dodge Ram 1500 Alarm/Remote Start Wiring Diagram

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37970
Printed Date: April 25, 2024 at 9:56 AM

Topic: 1998 Dodge Ram 1500 Alarm/Remote Start Wiring Diagram

Posted By: upjeeper
Subject: 1998 Dodge Ram 1500 Alarm/Remote Start Wiring Diagram
Date Posted: August 23, 2004 at 7:07 PM

has anyone got the wiring specs for a 1998 dodge ram 1500? I'm hoping to install my security/start unit this week. It looks like the 97 and 99 versions are different so i'm not sure which colors to use.

thanks in advance!

nate

Replies:

Posted By: auex
Date Posted: August 23, 2004 at 10:49 PM

There is a diagram section that would have the info you want, but since I already looked it up here.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: upjeeper
Date Posted: August 23, 2004 at 11:19 PM

awesome!

thank you, i looked but apparently not in the right place

Posted By: auex
Date Posted: August 23, 2004 at 11:19 PM

No problem.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: upjeeper
Date Posted: August 27, 2004 at 5:40 PM

do you have any information how to tie into the lock/unlock wires? I can't find the "10 Pin Connector Driver's Kick Panel " for the life of me.

I think i've seen it said before that the 98 dodge rams use the 5 wire system, if that's true is there any other way aside from this

https://www.the12volt.com/doorlocks/page3.asp#5w

to wire the locks? like i said i can't find that stupid wire, i found it way up behind the instrument cluster, and was able to tap into that (i know it's cheating) but it would be a PITA to cut the wires and splice into both sides