i am looking for a wiring diagram for this car its a 1980 lincoln mark vi thanks.
elizstoy@netscape.net
This is what I have:
| Constant 12 volts | YELLOW AND YELLOW | IGNITION SWITCH HARNESS |
| Ignition 12 volts | RED / LIGHT GREEN | IGNITION SWITCH HARNESS |
| Starter | RED / LIGHT BLUE OR | WHITE/ PINK - IGNITION SWITCH HARNESS |
| Dome Light | BLACK/ LIGHT BLUE | (+) AT PIN SWITCH |
| Trunk Pin Switch | WHITE/ PURPLE | (-) AT SWITCH (WITH OEM ALARM) |
| Parking Lamp | BROWN | (+) AT LIGHT SWITCH |
| Power Lock | PINK / YELLOW | DRIVER KICK PANEL OR |
| Power Unlock | PINK/LIGHT GREEN | BEHIND GLOVE BOX * |
* With OEM Keyless Entry Negative Pulse Door Lock
Without OEM Keyless Entry See Reversal Rest At Ground Door Lock
| Accessories |
| Window Up | D\ RED / YEL P\ RED / BLK D\ RED / L BLU P\ RED / BLK @ MAIN SWITCH | |
| Window Down | F/ YEL/RED F/ YEL/BLK R/ YEL/L BLU R/ YEL/BLK | |
| Ign Key Warn | BLACK/ PINK | (-) STEERING COLUMN HARNESS |
| Trunk Release | PURPLE / YELLOW | (+) AT RELEASE SWITCH |
| OEM Horn | DARK BLUE | (+) STEERING COLUMN HARNESS |
| Headlights | RED / YELLOW | (+) AT HEADLIGHT SWITCH |
| OEM Alarm Arm | N/A | |
| OEM Alarm Disarm | DARK GREEN/ PURPLE | (-) IN EITHER KICK PANEL |
Reversal Rest At Ground Power Window Circuit
Positive Pulse Trunk Release
| Remote Start |
| Tach Signal | DARK GREEN/ YELLOW | AT COIL * |
| Ignition #2 | GRAY / YELLOW | IGNITION SWITCH HARNESS |
| Ignition #3 | N/A | |
| Accessory | BLACK/ LIGHT GREEN | IGNITION SWITCH HARNESS |
| Neutral Safety | NOT GROUNDING TYPE - | OEM SWITCH OPENS STARTER CIRCUIT |
| Brake Light | LIGHT GREEN (+) | AT SWITCH ABOVE BRAKE PEDAL |
| Reverse Light | BLACK/ PINK (+) | AT SWITCH |
| Rear Window Defrost | N/A | |
* Throttle Body Injection.
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
