Tach Hook up

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4020
Printed Date: May 02, 2025 at 2:10 AM

Topic: Tach Hook up

Posted By: 2002neon
Subject: Tach Hook up
Date Posted: September 28, 2002 at 1:43 PM

I need to know how to hook up a tach in a 2002 chrysler Neon. 2.0L engine

the tach signal is a 2 pulse and my tach is only made for a 4 pulse. is there any way to hook this up without having to spend $150.00 for a chip to do this? If anyone has any ideas please let me know.

Thanks

-------------
Darren Landry

Replies:

Posted By: djfearny2
Date Posted: September 28, 2002 at 2:14 PM

you tach will not work with the two pulse it should ,

-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Posted By: Velocity Motors
Date Posted: September 29, 2002 at 10:10 AM

Doesn't the unit you got have a self tach learning option on it ? You can try wrapping the tach signal to the injector wire ( uncommon ) but this is a 1 cylinder signal.... good luck.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window