I need wiring color code for the ignition switch on a 2003 Dodge Dakota.
Any help would be greatly appreciated.
-------------
winston
This is what I have:
Constant 12 volts | PINK/BLACK | IGNITION SWITCH HARNESS |
Ignition 12 volts | DARK BLUE | IGNITION SWITCH HARNESS |
Starter | YELLOW | IGNITION SWITCH HARNESS |
Dome Light | YELLOW/VIOLET (-) | AT CENTRAL TIMER MODULE * |
Trunk Pin Switch | N/A | |
Parking Lamp | BLACK / YELLOW (+) | IN DRIVERS KICK PANEL |
Power Lock | WHITE/ DARK GREEN | AT CONTROL MODULE |
Power Unlock | SINGLE WIRE SYSTEM | IN DRIVER KICK ** |
* Central Timer Module Located In Drivers Kick Panel.(Dr Door TAN (-) All Others TAN/RED (-). ** Single Wire Door Lock System, WHITE/ DARK GREEN Wire Requires Chassis Ground Thru A 820 Ohm Resistor To Lock And Chassis Ground Thru A 330 Ohm Resistor To Unlock
Single Wire Resistor Door Locks Or
Use DATAbus # DB-CHDL--3-PK (no key required)
Accessories |
Window Up | D\ L BLUE P\ BROWN / WHITE @ MAIN SWITCH | |
Window Down | R/ WHITE S/ VIOLET/WHITE | |
Ign Key Warn | L BLUE (-) | IGNITION SWITCH HARNESS |
Trunk Release | N/A | |
OEM Horn | BLACK/ RED (-) | DRIVERS KICK PANEL AT 74 PIN CON |
Headlights | L GREEN/ ORANGE (-) | AT HEADLIGHT SWITCH |
OEM Alarm Arm | L GREEN/ ORANGE (-) | DRIVERS KICK PANEL * |
OEM Alarm Disarm | L GREEN/ ORANGE (-) | DRIVERS KICK PANEL ** |
* For OEM Alarm Arm The L GREEN/ ORANGE Wire Must See A Chassis Ground (-) Pulse Thru A 644 Ohm Resister. ** For OEM Alarm Disarm The L GREEN/ ORANGE Wire Must See A Chassis Ground (-) Pulse Thru A 1565 Ohm Resistor.
Reversal Rest At Nothing Power Window Circuit
Remote Start |
Tach Signal | BLACK/ GRAY | AT COIL |
Ignition #2 | DARK GREEN/ RED | IGNITION SWITCH HARNESS (TRANS) |
Ignition #3 | BLACK/ ORANGE | IGNITION SWITCH HARNESS (HEAT CONT) |
Accessory | DARK GREEN & RED / WHITE | IGNITION SWITCH HARNESS (BLOWER) |
Neutral Safety | | |
Brake Light | WHITE/ TAN (+) | ABOVE BRAKE PEDAL |
Reverse Light | VIOLET/BLACK (+) | LEFT FRONT OF ENGINE 28 PIN CON,PIN 2 |
Rear Window Defrost | | |
** TECH NOTES For Additional Information: On Ignition Switch Layout.
Ignition Switch Layout : Ignition #1 - D BLUE.................Powers Ignition Coil (Primary Ignition) Ignition #2 - DARK GREEN/ RED.........Powers Transmission Control Module * Ignition #3 - DARK GREEN.............Powers Blower Ignition #4 - BLACK/ ORANGE...........Powers Transmission Range Sensor Accessory - BLACK/ WHITE..............Radio Accessory - RED / WHITE................Wiper *Wire With (4.7L)
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
FWIW: According to the info I found during my search for my '03 Dakota, the BLACK/ orange(ACC1) and RED / white(IGN#3) appear to be reversed above.
Thanks for the input.
-------------
winston